• director@calonmarine.com

Types of outboard engines – select the right one!

Types of outboard engines – select the right one!

Two-Stroke Outboard Motors

In a two-stroke outboard motor, these five stages happen in two strokes of the piston. The crankshaft may turn once for each cycle of the piston. This engine makes power when every two strokes of the piston. It is a relatively simple design. There is one chamber that has two ports linked to it. One port permits the entrance of air and fuel. The other lets the exhaust gas gets expelled.

You may also notice that the 2 stroke outboard supplier is offering an uneven surface on the top. The pistons in these outboard motors tend to have a bump or dome shape to their top surface.

Modern Advancements

The two-stroke motors are on the current market are not the same engines of old. Nowadays, there are direct fuel injection and Electronic fuel injection models.

DFI outboards have the fuel directly inoculated into the cylinder. It is different from the carbureted project that depends on the air to carry the cylinder.

You may notice that traditional two-stroke engines are carburetors. These engines are holdup when it comes to fuel budget and emissions standards.

An EFI outboard uses a small computer or electronic system to control the flow of fuel and air. It will exert greater control over the design, increase fuel economy, and comply with modern releases standards.

Four-Stroke Outboard Motors

In a four-stroke outboard engine, the five combustion cycle steps happen in four strokes of the piston. The crankshaft creates two rotations for every cycle of the piston. It means that power can make one time for all four strokes. The pistons in these outboard motors tend to be flat across the top.

Instead of getting two ports that get covered and uncovered, a four-stroke outboard motor uses valves. It is a slightly more complex design and needs gear and chain mechanisms for it to function.

Choosing The Right Outboard Engine For Your Boat

The traditional go-to engine for boats was two-stroke engines. However, four-stroke machines have increased the following cheers to their more refined performance and cleaner procedure. Their enthusiastic throttle response and light weight make them perfect for use on the water.

Intended Use

Someone who is a tournament angler can do well with two-stroke outboard motors. You can have words with the top-notch 2 stroke outboard supplier. They get the ship upon a plane fast to get the fisherman to the prime spots.

But if the fisherman chooses to idle along and look for bass, then a four-stroke outboard motor is a better fit. It stays quiet; thus, the fish are less likely to spook. Moreover, it becomes better fuel economy and can maintain that steady slow speediness better and for longer.

Type Of Boat

Another consideration is the boat type you intend to put the outboard engine on. If you have a smaller boat, it might not withstand the weight of a four-stroke outboard motor. However, all ships have a plaque representing their maximum weight capacity. Bigger boats or those intended to carry heavyweights have hulls. They can grip the increased torque that a four-stroke outboard engine will produce. Overlook this weight restriction, and your outboard motor can put undue stress on your hull. It will cause cracking, dripping, and breaking.

Inquire Now